How to read an insulin syringe: units, mL and mcg

On a U-100 insulin syringe, 100 units is 1 mL, so each unit is 0.01 mL. Find the top mark to learn which syringe you have, count the small lines, and never mix units up with mL or mcg.

0.3 mL · top mark 30 · 1 unit a line0510152025300.5 mL · top mark 50 · 1 unit a line051015202530354045501 mL · top mark 100 · 2 units a line0102030405060708090100
The three U-100 syringe sizes at the same scale. Find your top mark.

The one fact to remember

A U-100 insulin syringe holds 100 units per millilitre. That is what “U-100” means. So 1 unit is 0.01 mL, 10 units is 0.1 mL, and the whole 1 mL syringe is 100 units. Every number on the barrel is in units.

Units measure volume. They say nothing about how much peptide is in that volume. The same 5 units can hold 50 mcg or 500 mcg depending on how much water went into the vial, which is why the calculator always asks for the vial and the water, not just the dose.

Which syringe do you have?

Look for the biggest number printed on the barrel. That is the top mark, and it tells you the size:

Top mark Syringe Small lines are
30 0.3 mL 1 unit apart
50 0.5 mL 1 unit apart
100 1 mL 2 units apart

The drawing above shows all three at the same scale. The 1 mL syringe is the one to be careful with: it looks like the others, and each small line on it is 2 units. Count five small lines on a 0.5 mL syringe and you have 5 units. Count five on a 1 mL syringe and you have 10.

Where to read the stopper

The plunger has a dark rubber stopper at the end nearest the needle. Read the dose at the edge of that stopper closest to the needle. On most syringes the stopper has a flat face there; line that face up with the mark.

Hold the syringe at eye level with the marks facing you. Looking down at an angle moves the apparent mark by a unit or two.

Units, mL and mcg are three different things

  • Units are marks on the syringe. 100 units is 1 mL on a U-100 syringe.
  • mL (millilitres) is volume. Some pharmacy labels give a dose in mL; multiply by 100 to get units.
  • mcg (micrograms) and mg (milligrams) are amounts of peptide. 1 mg is 1,000 mcg. A dose in mcg has to be turned into a volume using the strength of your mixed vial before it means anything on the syringe.

The FDA has reported people drawing five to twenty times their intended dose after confusing units with mL, or reading the dose as a number without checking which measure it was in (source 1). Reading a dose in mL as if it were units gives a hundredth of the dose; reading units as mL gives a hundred times too much.

When the answer falls between lines

If your calculated dose is 5 units on a 1 mL syringe, there is no line for it: the lines are at 4 and 6. The calculator tells you that and names the nearest line. It never rounds your dose for you. If you often land between lines, mixing the vial with a different amount of water, or using a 0.5 mL syringe, puts the dose on a line you can read. The reconstitution calculator shows which water amounts do that.

Where the maths comes from

The relationship between units and mL is fixed by the syringe standard. Drug labels give each dose as an amount in a known volume for exactly this reason: the tirzepatide label, for example, lists its doses as strengths such as 2.5 mg in 0.5 mL (source 2). The calculator applies the same idea to a vial you mixed yourself.

Three draws, drawn

The drawings below come from the same code as the calculator, so the stopper is at the exact mark. Each caption says where to read the stopper.

FAQ

How many mL is 10 units? 0.1 mL. On a U-100 syringe, divide units by 100 to get mL.

How do I tell which syringe I have? Find the biggest number on the barrel: 30 is a 0.3 mL syringe, 50 is 0.5 mL, 100 is 1 mL.

Is a unit the same as a mcg? No. A unit is a volume of liquid. How many mcg it holds depends on your vial and the water you added.

What if my dose falls between two lines? Use the nearest line the calculator names, or change the water or the syringe so the dose lands on a line.

05101520253035404550Line the stopper up here: 5Needle endPlunger
5 units on a 0.5 mL syringe. Each small line is 1 unit, so the stopper sits on the fifth line, which has the number 5 printed next to it.
0102030405060708090100Line the stopper up here: 5Needle endPlunger
The same 5 units on a 1 mL syringe. Each small line is 2 units, so 5 sits halfway between the 4 and 6 lines. This is where misreads happen.
0102030405060708090100Line the stopper up here: 25Needle endPlunger
25 units on a 1 mL syringe: 0.25 mL. Two and a half numbered gaps from the needle end.

Sources

  1. FDA alerts health care providers, compounders and patients of dosing errors associated with compounded injectable semaglutide products, US Food and Drug Administration, July 2024.
  2. Zepbound (tirzepatide) prescribing information, section 2: dosage and administration, Eli Lilly, FDA label, 2023.

How this page was made and checked: editorial policy.